Refrigerating Specialties Superducer Probe

Parker Refrigerating Specialties has developed multiple lengths of transducer type, liquid level probes for use with halocarbon refrigerants.  Focused directly on supermarket racks, the application supports monitoring, performance and charge manage-ment, and troubleshooting via a central microprocessor-based control panel.

These capacitance based probes interpret liquid level in a receiver, accumulator or similar pressure vessel as a selectable DC voltage range of either 0-5 or 1-6V when powered by an 11 to 47V DC regulated remote source.

The signal is proportional to the vertical liquid level surrounding the probe. The probe is mounted, sealed and grounded electrically via a ¾” NPT thread installed into a coupling on the top of the vessel. An available surrounding, vented steel sleeve reinforces and protects the probe while providing repeatability and precision output irrespective of vessel design.

The Type CLP Liquid Level Transducer Probe is used to provide a voltage signal proportional to the vertical liquid level. The signal transmitted can be converted by a remote controller or microprocessor functioning as a switching mechanism. This device is for use with halocarbon refrigerants. It may be used with liquid temperatures in a range of –107 to 135 degree F.

For personal assistance on RS products contact RCC.

 Product Spotlight

R/S
	Check/Isolation
	Hand Valves
	Liquid Level Control
	Pressure Regulator
	Safety Relief
	Solenoid Valves
	Strainers
	Rapid Purgers
Flo Con  Sporlan  HERL